| Procyon Mini 50w LED Grow Light |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
This kit is an inexpensive stepping stone into the world of high power LED grow lights, and assembly
time over traditional 5mm LED kits is reduced 10 fold!
Features:
milestone is reached.
Because the components are small and surface mount, this kit is "mostly assembled". There are no
electronic components to solder. However, you will need to solder two power wires from the circuit
board to the power connectors. And as with the other DIY kits, you will need electronics grade rosin core
solder and a proper 25w electronics soldering iron. Mechanical assembly just requires a small flat tip
screwdriver, a torx driver and a pair of pliers.
While the nominal operation is 12 volts DC, LEDs will function through a wide range of input voltage.
Because this light operates at 12 volts DC, it will require a separate DC power supply (not included!).
The least expensive option for hobbyists is to convert an ATX computer power supply, as these are
typically available for less than $50 and can often provide up to 20 amps at 12 volts.
Please note: this kit uses HIGH POWER LEDs. These are the same LEDs that are on our Procyon 100.
Just 1 of the Cree Xlamp LEDs can replace more than 60 conventional 5mm LEDs. This is because
they are significantly brighter. We recommend not staring directly at the LEDs while the light is on
because of the potential of eye damage.
Recommended coverage area is no larger than 24" x 24" (4 square feet) at a mounting height of 8-12"
above the plant canopy. LEDs may also be oriented for side lighting provided proper airflow is
maintained for cooling.
time over traditional 5mm LED kits is reduced 10 fold!
Features:
- 18 Red Cree XR-C Xlamps (Same as our Procyon 100)
- 6 Royal Blue XR-E Cree Xlamps (Same as our Procyon 100)
- 50,000+ hour lifetime*
- Simple mounting
- 50 watt power consumption (approximate)
- 12 volt DC operation
- 4.2 amp current draw (approximate)
- Measures 5"x5"x4"H
milestone is reached.
Because the components are small and surface mount, this kit is "mostly assembled". There are no
electronic components to solder. However, you will need to solder two power wires from the circuit
board to the power connectors. And as with the other DIY kits, you will need electronics grade rosin core
solder and a proper 25w electronics soldering iron. Mechanical assembly just requires a small flat tip
screwdriver, a torx driver and a pair of pliers.
While the nominal operation is 12 volts DC, LEDs will function through a wide range of input voltage.
Because this light operates at 12 volts DC, it will require a separate DC power supply (not included!).
The least expensive option for hobbyists is to convert an ATX computer power supply, as these are
typically available for less than $50 and can often provide up to 20 amps at 12 volts.
Please note: this kit uses HIGH POWER LEDs. These are the same LEDs that are on our Procyon 100.
Just 1 of the Cree Xlamp LEDs can replace more than 60 conventional 5mm LEDs. This is because
they are significantly brighter. We recommend not staring directly at the LEDs while the light is on
because of the potential of eye damage.
Recommended coverage area is no larger than 24" x 24" (4 square feet) at a mounting height of 8-12"
above the plant canopy. LEDs may also be oriented for side lighting provided proper airflow is
maintained for cooling.
| NEW 50w Procyon-Mini light kit Pricing: (Any quantity up to 4, contact us for larger qty) |
(Shipping outside of the US will cost extra. Please contact us for a shipping quote)
Not available. Check back for updates
MSRP: $199